Forced Cycle Lubrication Systems
YLD-30H
Key features
- 1. Oil can be recycled after the lubrication process.
- 2. Includes a cycling device and filter to ensure oil quality.
- 3. Includes a cooling device to lower the oil temperature.
- 4. The float switch outputs a signal when the oil level is low.
- 5. Includes a pressure valve and pressure gauge for adjustment.
Specifications
| Model | YLD |
|---|---|
| Voltage (Three Phase) | 220V/380V or 220V/440V |
| Power (HP) | 1/4 |
| Capacity of Terminal Output (A) | 0.3 (Float switch), 3 (Pressure switch) |
| Pole | 4 |
| Current Frequency (Hz) | 50/60 |
| Max. Output Pressure Mpa (kgf/cm2) | 0.5(5) |
| Output Volume (L/min) at Ø10 | 2.3 (TOP-11A) / 3.4 (TOP-12A) / 4.0 (TOP-13A) |
| Float Switch | O |
| Pressure Switch (kgf/cm2) | O |
| Pressure Gauge | O |
| Output Bore | Ø6 or Ø8 or Ø10 |
| Alarm Beeper | X |
| Tank Capacity (L) | 30/40 |
| Tank sizing note | Metal tank of other capacity can be tailored. Recommended oil viscosity range is 30-150cSt. Output volume is based on 60Hz and 110V/220V. |
